| |
SCOPE
AND USE
This information is to be used solely for my
use as references and NOT to be copied.
This
Process Standards/Specifications Supersession List (PSSL) authorizes process
supersession as specified, unless otherwise indicated.
Program
engineering limitations are specified within this document.
See Limitations section.
It
is the responsibility of the program identified in the Limitations column to
provide any instruction for action(s) to be taken in lieu of that entry shown in
the Replacing Process Document column.
Specification
Supersedence:
Table I lists process standards and specifications that have been
superseded by military, federal, industry, and the Boeing Company. This list provides current process documents, and is the
authority to allow (1) Supplier Management & Procurement to place this
drawing in all procurements,
(2)
Production Engineering to call out superseding documents on Assembly Orders and
Fabrication Orders for inside or outside manufacturing, and (3) Engineering
(Material & Process Engineering) to use replacing process documents in the
cross reference from process requirements documents to manufacturing process
instruction (how to) documents called out on in-house work instructions.
Definition
of PSSL Listing
Column 1 -
Specification, designation or process document called out on the design
drawing.
Column 2 -
Replacing specification designation or process that may be used in lieu
of design drawing callout.
Column 3 -
Limitations will identify restrictions regarding specific programs.
Column 4 -
Effective use date of replacing specification is date each entry was
authorized for inclusion in the drawing.
GENERAL
INSTRUCTIONS
A process
requirement specification that appears in the Replacing Process Document to be
Used column is valid for use as the superseding requirement for the
corresponding item found in the adjacent Process Document Called Out column.
CREDIT - This all has been referenced from : http://www.boeing.com/companyoffices/doingbiz/tscs/pssl.doc
Table
I
Supersession Listing
|
PROCESS
DOCUMENT CALLED OUT
|
REPLACING
PROCESS
DOCUMENT TO BE USED
|
LIMITATIONS
|
EFFECTIVE
USE DATE
|
|
1P00088 – Inspection, Penetrant
Method of (Liquid Oxygen Compatible)
|
ASTM E1417- Standard
Practice for Liquid Penetrant Examination
|
None
|
5-4-01
|
|
ANA-BUL-438 – Age
Controls of Age-Sensitive Elastomeric Items
|
ARP5316 – Storage of
Aerospace Elastomeric Seals and Seal Assemblies which Include an
Elastomer Prior to Hardware Assembly
|
None
|
5-4-01
|
|
ANSI – B46.1-1985 –
Surface Texture (Surface Roughness, Waviness, and Lay)
|
ASME – B46.1-1995 –
Surface Texture (Surface Roughness, Waviness, and Lay)
|
None
|
5-4-01
|
|
MIL-B-5087 - Bonding,
Electrical, and Lightning Protection, for Aerospace Systems
|
MIL-STD-464 -
Electromagnetic Environmental Effects
Requirements for Systems
|
None
|
1-13-00
|
|
MIL-B-7883,
Type I, Grade
- Brazing of Steels, Copper, Copper Alloys, Nickel Alloys,
Aluminum and Aluminum Alloys
|
AWS C3.4, Grade
(1) -
Specification for Torch Brazing
|
Not applicable to
International Space Station (ISS) Program
|
1-13-00
|
|
MIL-B-7883,
Type III, Grade
- Brazing of Steels, Copper, Copper Alloys, Nickel Alloys,
Aluminum and Aluminum Alloys
|
AWS C3.5, Grade
(1) -
Specification for Induction Brazing
|
Not Applicable to ISS
Program
|
1-13-00
|
|
MIL-B-7883,
Type II, Grade
- Brazing of Steels, Copper, Copper Alloys, Nickel Alloys,
Aluminum and Aluminum Alloys
|
AWS C3.6, Grade
(1) -
Specification for Furnace Brazing
|
Not applicable to ISS
Program
|
1-13-00
|
|
MIL-B-7883,
Type V, Grade
- Brazing of Steels, Copper, Copper Alloys, Nickel Alloys,
Aluminum and Aluminum Alloys
|
AWS C3.7, Grade
(1) -
Specification for Aluminum Brazing
|
Not applicable to ISS
Program
|
1-13-00
|
|
MIL-C-8837 – Coating,
Cadmium (Vacuum Deposited)
|
AMS-C-8837 – Coating,
Cadmium (Vacuum Deposited)
|
None
|
5-4-01
|
|
MIL-C-14550 – Copper
Plating (Electrodeposited)
|
AMS 2418 – Plating,
Copper
|
None
|
2-16-01
|
|
MIL-G-45204 – Gold
Plating, Electrodeposited
|
ASTM B488 – Standard
Specification for Electrodeposited Coatings of Gold for Engineering Uses
|
None
|
2-16-01
|
|
MIL-H-6088 - Heat
Treatment of Aluminum Alloys
|
AMS 2770 - Heat Treatment
of Wrought Aluminum Alloys Parts
|
None
|
1-13-00
|
(1)
The applicable Grade is the same Grade as is specified on the design
drawing.
Table
I (Continued)
Supersession Listing
|
|
PROCESS
DOCUMENT CALLED OUT
|
REPLACING
PROCESS
DOCUMENT TO BE USED
|
LIMITATIONS
|
EFFECTIVE
USE DATE
|
|
MIL-H-6875 - Heat
Treatment of Steel, Process for [heat treating to minimum tensile
strength 220 ksi (HRC 46) and higher] (Alloys 4340 and 52100)
|
AMS 2759/2 - Heat
Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi
(1517 MPa) and Higher
|
Not applicable to ISS
Program
|
1-13-00
|
|
|
MIL-H-6875 - Heat
Treatment of Steel, Process for (Alloys 15-5PH, 17-7PH, A286, and Custom
455)
|
AMS 2759/3 - Heat
Treatment Precipitation - Hardening
Corrosion-Resistant and Maraging Steel Parts
|
Not applicable to ISS
Program
|
1-13-00
|
|
|
|
MIL-H-6875 - Heat
Treatment of Steel, Process for (Alloys 304, 316, 321 and 347)
|
AMS 2759/4 - Heat
Treatment Austenitic Corrosion - Resistant Steel Parts
|
Not applicable to ISS
Program
|
1-13-00
|
|
|
MIL-H-6875 - Heat
Treatment of Steel, Process for (Alloys 410 and 440c)
|
AMS 2759/5 - Heat
Treatment Martensitic Corrosion - Resistant Steel Parts
|
Not applicable to ISS
Program
|
1-13-00
|
|
|
MIL-H-7199 - Heat
Treatment of Wrought Copper-Beryllium Alloys, Process for
|
AMS-H-7199 - Heat
Treatment of Wrought Copper-Beryllium Alloys, Process for
|
None
|
1-13-00
|
|
|
MIL-I-6866 - Inspection,
Liquid Penetrant
|
ASTM E1417 - Standard
Practice for Liquid Penetrant Examination
|
None
|
1-13-00
|
|
|
MIL-I-8950 – Inspection,
Ultrasonic, Wrought Metals, Process for
|
MIL-STD-2154 –
Inspection, Ultrasonic, Wrought Metals, Process for
|
Not applicable to ISS
Program
|
5-5-00
|
|
|
MIL-I-46058, Type XY–
Insulating Compound, Electrical (For Coating Printed Circuit Assemblies)
|
STP0608 – Parylene
Coating, Electrical Insulating Compound, Application Of
|
Not applicable to ISS
Program
|
1-13-00
|
|
|
MIL-M-3171 – Magnesium
Alloy, Process for Pre-treatment and Prevention of Corrosion On
|
AMS-M-3171 - Magnesium
Alloy, Process for Pre-treatment and Prevention of Corrosion On
|
None
|
1-13-00
|
|
|
MIL-P-116 –
Preservation, Methods of
|
MIL-STD-2073-1 –
Standard Practice for Military Packaging
|
None
|
5-4-01
|
|
|
MIL-P-81728 – Plating,
Tin-Lead (Electrodeposited)
|
AMS-P-81728 – Plating,
Tin-Lead (Electrodeposited)
|
None
|
2-16-01
|
|
|
MIL-S-6090 - Steel,
Carburizing and Nitriding, Processes for
|
AMS 2759/6 –Gas
Nitriding and Heat Treatment of Low Alloy Steel Parts
AMS 2759/7 – Gas and Vacuum Carburizing and Heat Treatment of
Carburizing Grade Steel Parts
|
None
|
1-13-00
|
|
|
|
|
|
|
|
|
|
|
Table
I (Continued)
Supersession Listing
|
PROCESS
DOCUMENT CALLED OUT
|
REPLACING
PROCESS
DOCUMENT TO BE USED
|
LIMITATIONS
|
EFFECTIVE
USE DATE
|
|
MIL-S-13165 – Shot
Peening of Metal Parts
|
AMS 2430 - Shot Peening
AMS 2432 – Shot Peening, Computer Monitored
|
None
|
1-13-00
|
|
|
MIL-S-45743 – Soldering,
Manual Type, High Reliability Electrical and Electronic Equipment
|
BSS7028 – Requirements
for Soldered Electrical/Electronic Assemblies
|
None
|
2-16-01
|
|
MIL-STD-105E – Sampling
Procedures and Tables for Inspection by Attributes
|
ANSI/ASQC Z1.4 –
Sampling Procedures and Tables for Inspection by Attributes
|
None
|
2-16-01
|
|
MIL-STD-453 - Inspection,
Radiographic
|
ASTM E1742 - Standard
Practice for Radiographic Examination
|
Not applicable to ISS
Program
|
1-13-00
|
|
MIL-STD-454, Requirement 5
- Electronic Equipment, Standard General Requirements for
|
BSS7028 - Requirements for
Soldered Electrical/Electronic
Assemblies
|
Not applicable to ISS
Program
|
1-13-00
|
|
MIL-STD-1523 – Age Controls of
Age-Sensitive Elastomeric Material (for Aerospace Applications)
|
ARP5316 – Storage of
Aerospace Elastomeric Seals and Seal Assemblies which Include an
Elastomer Prior to Hardware Assembly
|
None
|
5-4-01
|
|
MIL-STD-1595 –
Qualification of Aircraft, Missile and Aerospace Fusion Welders
|
AMS-STD-1595 –
Qualification of Aircraft, Missile and Aerospace Fusion Welders
|
None
|
5-4-01
|
|
MIL-STD-1949 - Magnetic
Particle Inspection
|
ASTM E1444 - Standard
Practice for Magnetic Particle Examination
|
None
|
1-13-00
|
|
MIL-STD-2000A - Standard
Requirements for Soldered Electrical and Electronic
Assemblies
|
BSS7028 - Requirements for
Soldered Electrical/Electronic
Assemblies
|
None
|
1-13-00
|
|
MIL-STD-2219 - Fusion
Welding for Aerospace Applications
|
AMS-STD-2219 - Fusion
Welding for Aerospace Applications
|
None
|
5-5-00
|
|
MIL-STD-6866 - Inspection,
Liquid Penetrant
|
ASTM E1417 - Standard
Practice for Liquid Penetrant Examination
|
None
|
1-13-00
|
|
MIL-T-6117
– Terminal, Wire Rope Assemblies, Swaged Type
|
STP0450-01
– Terminal-Cable Assemblies, Swaged Type
|
None
|
5-4-01
|
|
MIL-T-7928
– Terminal, Lug Splices, Conductors, Crimp Style, Copper, General
Specification for
|
AS7928
– Terminals, Lug: Splices,
Conductor: Crimp Style,
Copper, General Specification for
|
None
|
2-16-01
|
|
|
|
|
|
|
Table
I (Continued)
Supersession Listing
|
PROCESS
DOCUMENT CALLED OUT
|
REPLACING
PROCESS
DOCUMENT TO BE USED
|
LIMITATIONS
|
EFFECTIVE
USE DATE
|
|
MIL-T-10727,
Type I – Tin Plating: Electrodeposited
or Hot-Dipped, for Ferrous and Nonferrous Metals
|
ASTM
B545 – Standard Specification for Electrodeposited Coatings of Tin
|
None
|
5-4-01
|
|
MIL-T-10727,
Type II - Tin Plating: Electrodeposited
or Hot-Dipped, for Ferrous and Nonferrous Metals
|
ASTM
B339 – Standard Specification for Pig Tin
|
None
|
5-4-01
|
|
MIL-W-5088
– Wiring, Aerospace Vehicle
|
AS50881
– Wiring, Aerospace Vehicle
|
None
|
2-16-01
|
|
MIL-W-6858
– Welding, Resistance: Spot
and Seam
|
AMS-W-6858
– Welding, Resistance: Spot
and Seam
|
None
|
5-4-01
|
|
MIL-W-8160
– Wiring, Guided Missile, Installation of, General Specification for
|
AS50881
– Wiring, Aerospace Vehicle
|
None
|
2-16-01
|
|
MIL-W-8611
- Welding, Metal Arc and Gas, Steels, and Corrosion and Heat Resistant
Alloys Process for
|
AMS-STD-2219,
Class B (except radiographic inspect as required on the design drawing)
- Fusion Welding for Aerospace Applications
|
None
|
5-5-00
|
|
MIL-W-46132 - Welding,
Fusion, Electron Beam, Process for
|
AMS 2681 - Electron-Beam
Welding
|
None
|
1-13-00
|
|
MIL-W-47091, All Types - Welding,
Arc and Gas, for Fabricating Ground Equipment for Rockets and Guided
Missiles
|
AMS-STD-2219, Class C -
Fusion Welding for Aerospace Applications
|
None
|
5-5-00
|
|
MIL-W-83420 – Wire Rope,
Flexible, for Aircraft Control
|
MIL-DTL-83420 - Wire Rope,
Flexible, for Aircraft Control
|
None
|
5-4-01
|
|
MS33540 – Safety Wiring
Cotter Pinning, General Practices for
|
NASM33540 – Safety
Wiring and Cotter Pinning, General Practices for
|
None
|
5-4-01
|
|
MS33584 – Tubing End,
Standard Dimensions for Flared
|
AS4330 – Tubing, Flared,
Standard Dimensions for, Design Standard
|
None
|
5-4-01
|
|
MS33611 – Tube Bend
Radii
|
STP0406-01 – Tubing,
Non-Hydraulic Systems, Bending and Flaring, Process Requirements for
|
None
|
5-4-01
|
|
MSFC-SPEC-164 –
Cleanliness of Components for Use in Oxygen, Fuel, and Pneumatic
Systems, Specification for
|
1P00071 – Cleanliness
for Fuel and Oxidizer Systems and Related Pneumatic Systems
|
None
|
2-16-01
|
|
NHB 5300.4(3A-1) - NASA
Soldering Handbook
|
BSS7028 - Requirements for
Soldered Electrical/Electronic
Assemblies
|
Not applicable to ISS
Program
|
1-13-00
|
|
QQ-P-35 – Passivation
Treatments for Corrosion-Resistant Steel
|
ASTM A967 – Standard
Specification for Chemical Passivation Treatments for Stainless Steel
Parts
|
None
|
| |
